Panasonic DP-C213 Printer User Manual


 
18
Chapter 2 General Settings
60 - 79 61 SMB Device
Name
Set the device name for Microsoft
Network (SMB).
There is no default value. When the
machine starts up under the following
parameter settings “59 SMB” is set to “On”,
61 SMB Device Name”, and “62 SMB
Workgroup Name” are not set, then,
“Panasonic DP-XXXX and the lower six
figures of MAC Address” will be
automatically setup.
Up to 15 characters
62 SMB Workgroup
Name
Set the working group name for
Microsoft Network (SMB).
There is no default value. When the
machine starts up under the following
parameter settings “59 SMB” is set to “On”,
61 SMB Device Name”, and “62 SMB
Workgroup Name” are not set, then,
DPCL-PRINTER” will be automatically
setup.
Up to 15 characters
63 SMB Comment Set comments about the machine
used for Microsoft Network (SMB).
Up to 48 characters
64 Bonjour Set the Bonjour.
z When the optional Printer Controller
Module (for Adobe
®
PostScript
®
3
) is
installed.
There is no default value. When the
machine starts up, and parameter “64
Bonjour” is set to “On”, then, “Panasonic
DP-XXXX and the lower six figures of MAC
Address” will be automatically setup.
Off, On Off
65 Bonjour Name Set the name of Bonjour.
z When the optional Printer Controller
Module (for Adobe
®
PostScript
®
3
) is
installed.
There is no default value. When the
machine starts up, and parameter “64
Bonjour” is set to “On”, then, “Panasonic
DP-XXXX and the lower six figures of MAC
Address” will be automatically setup.
Up to 31 characters
66 IPv6 Set this parameter to “On” when using
the machine for IPv6.
z For details about setting IPv6, refer to
Embedded Web Server in the
Document Management System (For
Embedded Web Launcher, and Web
Server) on the provided CD-ROM.
Off, On Off
No. 61 to 66
After setting any of these parameters, turn the
machine’s power switch Off, and then On again.
Key Operator
No. Parameter Comments Selective Item
Standard
Setting