Filter
Top Products
54
Chapter 4 Fax/Email Settings
120 - 159
132 Via Fax Server Set for RightFax function. Invalid, Valid Invalid
133 Job Build and SADF Mode Set “Yes” to use the Job Build
and SADF function.
z This function is only available
when “05 Memory (HOME)” in
Fax/Email Settings >Fax
Parameters is set to On.
z Function Parameters (Fax/
Email Settings>Fax
Parameters) “82 Quick
Memory XMT” is not available
for this function.
z Up to 255 pages can be
stored. When the number of
pages exceeds 255, the
memory becomes full.
No, Yes No
140 LAN RLY XMT Request Enable or disable the LAN relay
transmission request function.
z Refer to Example : Initial
Sending Station (LAN Relay)
(see page 74).
Invalid, Valid Invalid
141 LAN XMT Reduce Enable or disable reduced
transmission when transmitting
a large sized original via Internet
Fax.
When set to “Valid”, a B4/
Ledger sized original is reduced
and transmitted as A4/Letter
sized paper.
z Refer to Emailing a Ledger-
Sized Document in the
Operating Instructions (For
Facsimile and Internet Fax) on
the provided CD-ROM.
Invalid, Valid Invalid
142 Relay XMT Enable or disable the LAN
relayed transmission function.
z Refer to Example : Relay
Station (LAN Relay) (see
page 76).
Invalid, Valid Valid
143 Relay XMT Report
Select the printing attributes for a
LAN relayed transmission report.
•Off
Don’t send.
• Always
Always send.
• Inc Only
Send only if communication
has failed.
z Refer to Example : Relay
Station (LAN Relay) (see
page 76).
Off, Always, Inc Only Always
Fax Parameters
No. Parameter Comments Selective Item
Standard
Setting