Filter
Top Products
- 42 -
Connections
@When the unit is to be connected to a personal computer using the IEEE1394 cable, and
the camera and pan/tilt head are to be controlled by the personal computer
• Use the pan/tilt head cable (AW-CA50E29) to connect the unit with the convertible
camera containing the plugged-in IEEE1394 card.
• Set controller selection switch SW1 to the right side (RP501), and select the
transmission signal selection setting that supports the analog/IEEE1394 card.
• Use the IEEE1394 cable to connect the unit with the personal computer (Windows).
• Install the driver software and control software from the floppy disk supplied with the
IEEE1394 card in the personal computer (Windows).
• Check that the pan/tilt head and camera can be controlled by the personal computer
(Windows) using the control software.
❈ For further details, refer to the IEEE1394 card instructions.
Personal computer
(Windows)
AC adapter:
AW-PS300A
Pan/tilt head cable
(AW-CA50E29)
IEEE1394 cable,
max. 15 ft. (4.5 m
)
DC cable
(UL Type SPT-2 2!16 AWG or
UL Type NISPT-2 2!16 AWG,
to be locally purchased)