Panasonic AW-PH360N Network Card User Manual


  Open as PDF
of 52
 
- 46 -
1. To set the upper limit position of the
travel range:
Using the controller, tilt the camera to
the position which is to serve as the
upper limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 15 .
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 15 .
The setting is released when the lamp of
the PRESET MEMORY button 50 comes
on.
2. To set the lower limit position of the
travel range:
Using the controller, tilt the camera to
the position which is to serve as the
lower limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 20 .
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 20 .
The setting is released when the lamp of
the PRESET MEMORY button 50 comes
on.
3. To set the left-most limit position of
the travel range:
Using the controller, tilt the camera to
the position which is to serve as the left-
most limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 5 .
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 5 .
The setting is released when the lamp of
the PRESET MEMORY button 50 comes
on.
4. To set the right-most limit position of
the travel range:
Using the controller, tilt the camera to
the position which is to serve as the
right-most limit.
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 10 .
The setting is completed as soon as the
lamp of the PRESET MEMORY button
45 comes on.
To release the setting:
While holding down the MENU/LIMIT
button on the controller, press PRESET
MEMORY button 10 .
The setting is released when the lamp of
the PRESET MEMORY button 50 comes
on.
OFor the controller AW-RP400
Limiters
 previous next