36
JOG DIAL
Storing names and telephone numbers
in the JOG DIAL directory!
For rapid access to frequently dialed numbers, the unit provides a JOG DIAL directory
(50 stations).
For your convenience, the following station has been pre-programmed.
HELP-FAX (1-800-435-7329): If you cannot correct a problem after trying the help function
(p. 10), call using this station (p. 39).
If you do not need the above station, you can erase it (p. 38).
1
Press .
Display:
2
Rotate until the following is
displayed.
3
Enter the name, up to 10 characters, by
following the instructions on the next page.
Example:
4
Press .
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
●
If you want to enter a hyphen, press
.
6
Press .
●
To program other items, repeat steps 3 to 6.
7
Press to exit the
program.
DIRECTORY PROGRAM
NAME=
123
REGISTERED
111
SET
FLASH/CALL WAIT
NO.=5552233
NO.=
SET
NAME=Alice
NAME=
JOG DIAL
PRESS
1
DIR.PROG.
USE
1
JOG-DIAL
1
OR
DIRECTORY PROGRAM
/
JOG DIAL
STOP
(Delete)
DIRECTORY PROGRAM
SET
Display
(Insert)
MUTE
(Hyphen)
FLASH/CALL WAIT
Helpful hint:
●
You can confirm the stored items on the
display (p. 39) or on the telephone number list
(p. 105).
Note:
●
When the following message is displayed in
step 6, you can only store 5 more items.
Display:
●
If there is no space to store new stations, the
following message is displayed in step 1.
Erase unnecessary stations (p. 38).
●
A hyphen or a space entered in a telephone
number counts as two digits.
JOG-DIAL1FULL
SPACE=151DIRS.
To correct a mistake
●
Press or to move the cursor to the
incorrect character/number, and make the
correction.
To delete a character/number
●
Move the cursor to the character/number you
want to delete and press .
STOP