93
Operations
For fax advantage assistance, call 1-800-435-7329.
(continued)
General (cont.)
Problem
The
button does not function.
The CHARGE light never goes
out while charging.
While having an intercom call,
a series of tones is heard.
LOCATOR/INTERCOM
●
The handset is too far from the main unit or is engaged in
an outside call.
●
This is normal.
●
Someone is calling you from outside. Press or
to answer the outside call. The
intercom call will be terminated.
DIGITAL SP-PHONE
Cause & Remedy
TALK
Cordless handset
Problem Cause & Remedy
The handset does not work.
The handset does not ring.
The display shows the
following message and an
alarm the sounds when I press
/
/or.
Static, sound cuts in/out,
fades. Interference from other
electrical units.
The handset stops working
while being used.
I cannot store a telephone
number in the handset
memory.
While storing a telephone
number in the handset, it
starts to ring.
No
1
link
1
to
1
base
Place
1
on
1
cradle
and
1
try
1
again.
PLAYBACK
INTERCOM
REMOTE SP
TALK
●
Make sure that the battery is installed correctly (p. 102).
●
Charge the battery fully (p. 20).
●
Clean the charge contacts (p. 104) and charge again.
●
The ringer volume is set to off. Press
(p. 22).
●
The handset is too far from the main unit. Move closer and
try again.
●
Place the handset on the main unit and try again.
●
The power cord is disconnected. Plug in the power cord.
●
Locate the handset and the main unit away from electrical
appliances.
●
Move closer to the main unit.
●
Press to select a clear channel.
●
Raise the main unit antenna.
●
Place the handset on the main unit, and disconnect the
power cord to reset the unit. Connect the power cord, and
try again.
●
You cannot store a number while the unit is in the talk or
intercom mode.
●
Do not pause for over 60 seconds while storing a number.
●
To answer a call, press .
The program will be canceled. Store the number again.
TALK
CH
LOUD/RINGER