Filter
Top Products
30
TONE, FLASH and REDIAL/PAUSE buttons
TONE button
2 3
4 5 6
7 8 9
0
1
The TONE ( ) button is used for rotary pulse dial
services and allows you to temporarily change from pulse
to tone mode during a dialing operation.
When you hang up, the unit will automatically return to
pulse mode.
Entering pauses
If the REDIAL/PAUSE button is pressed during dialing, a pause will be inserted.
Example-1: When your unit is connected to a host exchange, insert a pause to get an outside line.
9 PAUSE
Line access code
Phone number
1. Lift the handset or press .
SP-PHONE
FLASH button
The FLASH button functions as the hookswitch on a
regular phone. If you misdial or dial another phone
number, press the FLASH button firmly.
The FLASH button also allows you to use special
features of a host exchange (if connected) or local
telephone company services such as call waiting. For
further details, contact your local telephone company.
Note:
TONE, FLASH and PAUSE can be stored
into a phone number for automatic dialing.
Example-2: If transmission errors occur when making an overseas transmission, add two pauses at the end
of the phone number.
International
access code
Country
code
PAUSE PAUSE
Phone
number
Redialing the last number dialed
If the REDIAL/PAUSE button is pressed immediately after a dial tone is obtained, the last number dialed will
be redialed.
TONE
REDIAL/PAUSE
FLASH
2. Press .
If the line is busy when using the speakerphone, the unit will automatically redial the number up to
14 times.
REDIAL/PAUSE