Filter
Top Products
8
5
Place the handset on the handset cradle and close
the lids securely.
If the following message is displayed when the
unit is turned on, the handset cradle is not
installed correctly.
Check step 4 again.
4
Press down on the marked on the handset
cradle until it clicks into place.
Make sure the two hooks lock the handset
cradle firmly.
3
Insert the handset cradle by matching the triangles.
2
Open the front lid by pressing the front lid open
button.
Open the back lid by lifting up the tabs located
on both sides.
B
A
If you want to use this unit with a handset, install the handset and handset cradle.
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
Even if the handset and handset cradle are not installed, you can make or answer calls using the
SP-PHONE button. When you do not use the handset and handset cradle, see pages 43 and 54.
Installing your unit
Installing the handset cradle
1
Connect the handset cord.
A
Tab
Front lid open
button
B
Handset cord
Handset
Triangles
Hooks
Triangles
CHECK CRADLE