81
Specifications
Technical data about this product!
Applicable lines: Public Switched Telephone Network
Document size: Max. 216 mm in width / Max. 600 mm in length
Effective scanning width: 208 mm
Effective printing width: A4: 202 mm
Letter/Legal: 208 mm
Transmission time*: Approx. 4 s/page (ECM-MMR Memory transmission)**
Scanning density: Horizontal: 11.8 pels/mm
Vertical: 3.9 lines/mm –STANDARD
11.8 lines/mm –FINE/SUPER FINE/PHOTO
Halftone level: 64-level
Scanner type: Contact Image Sensor (CIS)
Printer type: Laser Beam Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem speed: 33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 / 19,200 / 16,800 /
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps;
Automatic Fallback
Operating environment: 10 °C – 32.5 °C, 20% – 80% RH (Relative Humidity)
Dimensions (H x W x D): 217 mm x 443 mm x 461 mm
Mass (Weight): Approx. 9.2 kg
Power consumption: Standby: Approx. 7 W
Transmission: Approx. 17 W
Reception: Approx. 250 W
Copy: Approx. 250 W
Maximum: Approx. 900 W (When the fuser unit turns on
)
Power supply: 220–240 V AC, 50 Hz
Memory capacity: Approx. 150 pages of memory transmission/reception
(Based on the ITU-T No. 1 Test Chart in standard resolution.)
Laser diode properties: Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
Print speed: Approx. 10 ppm (pages per minute)
Printing resolution: 600 x 600 dpi
** Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the other party’s
machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart.
If the capability of the other party’s machine is inferior to your unit, the
transmission time may be longer.
ITU-T No. 1 Test Chart
Note:
●
Any details given in these instructions are subject to change without
notice.
●
The pictures and illustrations in these instructions may vary slightly
from the actual product.
KX-FLB756E (080-083) 03.2.19 4:25 PM Page 81
