Filter
Top Products
8. Programmable Features
43
Setting recall time {# }{7}{2} The recall time depends on your telephone exchange or host
PBX.
{1} “900ms”
{2} “700ms”
{3} “600ms”
{4} “400ms”
{5} “300ms”
{6} “250ms”
{7} “200ms”
{8} “160ms”
{9} “110ms”
{*} “100ms” (default)
{0} “90ms”
{#} “80ms”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
L If you set the location setting to “NEW ZEALAND” (feature #74
on page 43), the default setting will be “600ms”.
Setting the location
where you use this unit
{#}{7}{4} This setting must match your location.
{1} “AUSTRALIA” (default): To use in Australia.
{2} “NEW ZEALAND”: To use in New Zealand.
Setting the connecting
tone
{#}{7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting (KX-
FP215 only)
{#}{7}{7}{1} “TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 27)
{2} “FAX ONLY”: Fax only mode (page 26)
Resetting advanced
features to their default
settings
{#}{8}{0}{0} “NO” (default)
{1} “YES”
To reset the advanced features:
1. {MENU} i {#}{8}{0}
2. Press {1} to select “YES”. i {SET} i {SET} i
{MENU}
L The ECM setting (feature #68 on page 42) and the
location setting (feature #74 on page 43) will not be reset.
Feature Feature code Selection
FP205-215AL-PFQX2516ZA-en.book Page 43 Thursday, July 13, 2006 9:31 AM