Filter
Top Products
Quick Start
4
For Assistance, Call 1-800-435-7329
Installation
Film cartridge (See page 19.)
1
A. Slide the cover open lever forward.
B. The cover is under tension to improve print quality.
Pull up hard enough to open.
C. Remove the leaflet from the unit.
D. If the film in the film cartridge is slack, tighten it by
winding the bottom side gears.
E. Install the film cartridge into the unit.
F. Make sure that the blue label on the cartridge
matches the one on the unit.
G. Close the cover securely by pushing down on
both corners.
Blue labels
Blue label
Bottom
side gears
Leaflet
Shipping tape
Remove the shipping tape from the unit and stacker, and install as follows.
Blue gear
Shipping tape
Incorrect
Correct
Tight
Cover
Cover open
lever