Filter
Top Products
Single Sheets and Envelopes
(Friction Mode)
1. A Turn the power on.
The PAPER OUT indicator will flash indicating that
no paper is installed in the printer.
B Adjust the head gap lever (A) for the
thickness of paper you are using.
Position Used for
1 or 2 Thinner sheets
3, 4, 5 and 6
Thick sheets or envelopes
1
2
3
4
5
6
A
B
A
2. Set the paper feed selector (A) to the " "
position.
A
3. Raise the top cover (A) to single sheet feed
position.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
A
4. Raise the paper support (A).
A
5. Insert a sheet of paper with the printed side face
down behind the platen by aligning its left edge
with
0
on the top cover.
Operating Instructions 23
Setup