Panasonic KX-P1121E Printer User Manual


 
CAUTION
Power
When the unit is not used over an
extended period of time, switch it off, and
unplug it. If an unused unit is left
connected to a power source for a long
period, degraded insulation may cause
electric shock, current leakage, or fire.
Installation and Relocation
Do not position the unit in a location
where it is unstable.
To prevent fire or shock hazard, do not
expose this unit to rain or any type of
moisture.
Do not place the unit in a hot humid or
dusty environment.
Prolonged exposure to these adverse
conditions may cause fire or electric
shock.
Do not block the air vents. Doing so can
cause heat to build up, and may result in
fire.
When moving the unit, be sure to unplug
the power cord from the AC outlet. If the
unit is moved with the power cord
attached, it can cause damage to the
cord which could result in fire or electric
shock.
Operating Safeguards
If the unit falls down or gets damaged,
turn the unit off, and unplug the power
cord. Otherwise, it may cause fire or
electric shock.
Do not place any liquids or heavy items
on the unit.
Accidental spillage of liquid into the unit
may cause severe damage. If this
occurs, turn the unit off, unplug the power
cord, and contact your dealer for service.
When the smoked plastic cover is open,
moving parts are exposed. Take care to
avoid contact with the moving parts,
including fingers, hair, jewelry, neckties,
etc. Personal injury or damage to the unit
could result.
Do not touch the printhead, as it
becomes hot, even when not printing.
Otherwise, it may cause burns.
Operating Instructions 9
Safety Information