Filter
Top Products
Symptom Possible Cause Probable Solution
Printout is double-spaced. Auto LF is ON. Set Auto LF to OFF.
(Page 27)
Keeps printing on the same line. Computer is not sending a LF
command.
Set Auto LF to ON.
(Page 27)
Both of the FONT LEDs are
blinking just after turning on the
power.
There is an electrical
malfunction.
Consult your dealer.
Wrong Character Set prints. Wrong Character Set is
selected.
Set the Character Set as required.
(Page 25)
When printing on custom fanfold
paper, the print position shifts
after the second page.
The created custom paper size
(paper length) setting is
incorrect.
When creating a custom size,
select "English" for Units and input
the size in inches. Round the value
to 2 decimal places, as in the
examples below:
Form size Input size
8 1/2 inch 8.50 inch
11 1/3 inch 11.34 inch
34 Operating Instructions
Maintenance & Troubleshooting