Filter
Top Products
21
Multi live mode
This mode lets you transmit the images from four computers at the same time to a
single projector. Furthermore, you can select either the “4-screen style” or the “Index
style” for this mode, and switch alternately between the modes by pressing the
[IndexWindow] button on the remote control or selecting [Index double] on the
projector’s main menu (see page 27), and then pressing the [ENTER] button.
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).
1
Click [ ] on the launcher.
2
Select and click the projection position.
The computer image is transmitted to the selected quarter
of the projection screen.
3
Switching to a different position
Select and click a different projection position in step 3 above.
Quitting multi live mode
Select and click the checked position in step 3 above.
■ 4-screen style
Using Wireless Manager ME (cont.)
Index style4-screen style
Notes:
• When the projector starts up, the 4-screen style is set for multi live mode.
• When the style setting is switched, live mode will be released for a computer in
live mode. To resume the live mode, re-establish it from the launcher.
Note:
In 4-screen style mode, the computer images from all the computers connected to
the projector can be transmitted to the projector. (The last multi live request has
priority.)