Filter
Top Products
30
Other Applications (Changing the Initial Settings) (cont.)
Wireless user connections
1
OFF
ON
NETWORK
NAME CHANGE
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
DEFAULT
SELECT
NETWORK
RETRN
ENTER
Select [NETWORK] on the network
menu, and press the [ENTER]
button.
1
Select [USER] with the [ ]
buttons, and press the [ENTER]
button.
2
■ Projector operations
If the projector and computer could not be connected by following the steps on page
16, connect them by performing the steps below.
Start up the wireless card utility.
Make the same SSID,
communication mode and WEP
settings as the default projector
network [USER] settings.
1
Open the Windows TCP/IP Setting window.
Refer to the Windows manual for a detailed description.
For the subnet mask, register the same value as the default projector network
[USER] setting.
For the IP address, enter the same value up to the “255” part of the default
subnet mask setting for projector network [USER], and then enter a different
value for the remainder.
2
Start up Wireless Manager ME, and select [USER] from
the network number list.
(See page 28)
Wait until the projector’s host name appears on the connection list, select the
host name displayed, and proceed with the connections.
3
■ Computer operations
Default projector network [USER] settings
SSID : Panasonic Projector
Communication mode
: 802.11 AdHoc
WEP : Off
Setting Example
Setting item
Default projector network Example of
[USER] setting computer setting
Subnet mask 255. 255. 255. 0 255. 255. 255. 0
IP address 192. 168. 10. 100 192. 168. 10. 101
NETWORK
USER
ADJ
RETRN
ENTER