Panasonic KX-FB421 All in One Printer User Manual


 
Sending Faxes
49
Sending the same document
to pre-programmed parties
using the auto document
feeder
1
Confirm that there are no documents on the
scanner glass.
Insert the document FACE DOWN into the
feeder.
L If necessary, press {
{{
{
RESOLUTION
}
}}
}
repeatedly to select the desired
resolution (page 41).
2
Press {
{{
{
BROADCAST
}
}}
}.
L You can also use the navigator key.
Press {
{{
{<
<<
<}
}}
} or {
{{
{>
>>
>}
}}
}, then press {
{{
{+
++
+}
}}
} or
{
{{
{-
--
-}
}}
} until the following is displayed, and
press {
{{
{
SET
}
}}
}.
<BROADCAST>
b
SEND:PRESS SET
EDIT:PRESS MENU
L The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.
L After transmission, the stored document
will be erased automatically, and the
unit will automatically print a broadcast
sending report.
Note:
L Do not open the document cover while
sending a fax with the auto document feeder.
L If you select FINE, SUPER FINE or
PHOTO resolution, the number of pages
that the unit can transmit will decrease.
L If the document exceeds the memory
capacity, sending will be canceled.
L If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialed up to 2 times after all of the
other entries have been called.
To send the same document to more than
one party only once
You can also select the parties for each
transmission.
1. Insert the document.
2. Press {
{{
{>
>>
>}
}}
}.
3. Press {
{{
{+
++
+}
}}
} or {
{{
{-
--
-}
}}
} until the following is
displayed.
<ONE TIME BROAD>
PRESS SET
4. Press {
{{
{
SET
}
}}
} to start programming the entries
you want to transmit to.
DIR= [00]
NAVI.[+ -] & SET
5. Press {
{{
{+
++
+}
}}
} or {
{{
{-
--
-}
}}
} until the desired entry you
want to transmit to is displayed.
Example: Bill
6543210
6. Press {
{{
{
SET
}
}}
}.
Example: DIR=Bill [01]
SEND:PRESS SET
L To program other entries, repeat steps 5
and 6 (up to 20 entries).
7. Press {
{{
{
SET
}
}}
} to start transmission to the
programmed entries.
FACE
DOWN
{BROADCAST}
{<} {>} {+} {-}
{STOP}
{RESOLUTION}
{SET}
{FAX/START}