Filter
Top Products
ENGLISH-31
Useful functions
30-ENGLISH
Correcting the image position
automatically (AUTO SETUP)
This projector can adjust the position of the image and the settings for “DOT
CLOCK” and “CLOCK PHASE” when PC signals are being input.
Turning off the picture and sound
momentarily (SHUTTER)
The “SHUTTER” function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in “SHUTTER” mode than it does
in normal projection mode.
Press the AUTO SETUP button while PC signals
are being projected.
BAutomatic positioning
will be carried out.
Screen
Projected
image
NOTE:
BIf the dot clock frequency is 100 MHz or higher, “DOT CLOCK”, and
“CLOCK PHASE” will not be adjusted automatically. Refer to page 48 for
details.
BIf the edges of the projected image are indistinct, or if a dark picture is
being projected, the automatic setup processing may stop automatically
before it is complete. If this happens, project a different picture and then
press the AUTO SETUP button again.
Press the SHUTTER button.
BThe picture and sound will be turned off.
BPress any button on either the projector or
remote control unit to return to normal operating
mode.
POWER
AUTO
SETUP
INPUT MENU
SHUTTER
VOLUME
ENTER
RO TATE
RETURN
ENTER
STD
POWER
AUTO
SETUP
INPUT MENU
SHUTTER
VOLUME
ENTER
RO TATE
RETURN
ENTER
STD
POWER
AUTO
SETUP
INPUT MENU
SHUTTER
VOLUME
ENTER
RO TATE
RETURN
ENTER
STD
Adjusting the volume (VOLUME)
Press the VOLUME +/- button.
BPress the + button to raise the volume.
BPress the - button to lower the volume.
[