Filter
Top Products
102
Setting of the projector
R
Personal
computer
Personal computerProjector
Typical setting
Parameters
IP address
Assign an IP address that is different from that of PC.
Example: If the IP address of the PC is 192.168.10.11, assign
an address such as 192.168.10.12 to the projector.
Subnet mask
Mode
Channel
Use the same settings as the PC.
PEER-TO-PEER
Use the same setting as the PC.
If communication in ad hoc mode is unavailable
Make setting for use in PEER-TO-PEER mode, which allows direct communication
via the LAN card. Use this setting when communication is not available in ad hoc
mode.
For details of setting the projector, refer to "Setting the projector" on page 104.
Wireless
LAN card
SSID
Use the same setting as the PC.
Note:
• The setting on the PC side can be used without alteration.