Filter
Top Products
51
Advanced Operation
Projection lens replacement
By replacing the projection lens with a lens that is sold separately, you can
change the projection distance.
#Turn the projection lens
anticlockwise until it is in
position.
$While pressing the lens
release button, turn the
projection lens anticlockwise
again.
%Remove the projection lens.
NOTE:
BWhen replacing a projection lens, make sure that the power is off (the
Power indicator illuminates green).
BDo not touch the signal connection. If any dust or lint gets onto the signal
connection, the electrical contact may become poor.
BDo not touch the surface of the lens with your bare hands.
BStore the replaced projection lens away carefully to avoid subjecting it to
excessive vibration or shock.
%
$
#
$
#
#Insert the other projection
lens (sold separately) as far
as it will go, while matching
the projection to the groove.
$Turn the projection lens
clockwise until a click is
heard.
Signal connection
Projection
Groove
Removing the lens
Installing the lens