Filter
Top Products
125
To capture and transfer the image of PC screen
The user can capture the screen currently displayed on the PC monitor and transmit
it to the projector or saved it in the PC.
Before transmitting an image
It is necessary to switch the input of the projector before
sending an image to the projector by Wireless Manager.
Switch to "NETWORK" using the input selector (RGB)
button of the projector or the remote control.
Functions on the "Capture" window
When you right-click the icon on the task bar and choose "Capture", the "Capture"
window is displayed.
1. "Full screen" button
A full screen of the PC is captured.
The screen is kept blank during the image
capture process and it will be displayed again
when the capture is completed. The captured
image is displayed on PictureBox.
The process during the capture is displayed in
scheduled process window (8).
For details of the setting of the process during the
capture, refer to "Capture" in the option screen.
2. "Area" button
The user can specify an area on the PC screen
and capture the image within the area.
The "Capture" window is kept blank during the
area definition process. Use the mouse to clip
the area to be captured. When the clipping is
completed, the image is captured and displayed
in the PictureBox of the "Capture" window.
3. "Scope" button
A specified window on the PC monitor can be captured as an image.
The image will be captured when the Scope button is dragged with the mouse
and dropped on the desired window to be captured.
4. "Transmission" button
The image displayed in the PictureBox of the "Capture" window is transmitted to
the projector.
For details, refer to "Registration of
projector".
5. "Full size" button
This button toggles the "Capture" window
between the full size and the minimum size.
6. "Option" button
The user can define the conditions for
capturing an image.
On the Option screen, the user can specify
the type of capture format, after-capture
processing and the delay time for capturing.
NETWORK
8
1
2
67
4
3
5