Filter
Top Products
37
Click [ ] on the launcher.
The same image is provided for all the projectors selected in step 7.
9
Check the status indication on the launcher to make sure that transmission is
possible ( ). (See page 28)
8
• Projection is provided in multi-live mode for the projector having the same network number that is selected on the PC.
• Among the selected projectors, if there is one to which other PC is transmitting data or of which the projection screen is not set
to full-screen, projection is provided for that one.
• The greater the number of projectors, the slower the transmission.
• Picture quality or other options can be set on the <Option> window by clicking [Option] in the launcher menu. (
See page 43)
• Sound cannot be output in the multiple source live mode.
• If the connection error occurs during projection, the message [“Live Mode” is deactivated] will appear. Check the
communication environment, then restart projection by clicking launcher buttons.
• Set the [LIVE MODE CUT IN] of the unit to [ON] in advance to enable a different computer to interrupt and project images in
live mode. (See page 53)
Quitting multiple source live mode
Click [ ] on the launcher again.
Various projection methods
(cont.)