Filter
Top Products
62
Using WebBrowser (cont.)
Password settings
Click [Detailed set up]→[Change password] in the menu.
Set a password for access of the [Projector control window].
Enter the previous password and the new password.
Enter the new password in [Retype] and click [OK].
Authentication server settings
Click [Detailed set up]→[Authentication set up] in the menu.
Auth : Change the authentication method as desired.
SMTP Auth : For SMTP authentication, change the
authentication method to use, as desired.
POP Server name : Enter the POP server name.
User name : Enter the user name for the SMTP or POP
server.
Password : Enter the password for the SMTP or POP server.
SMTP server port : Enter the SMTP server port number.
POP server port : Enter the POP server port number.
• You can enter a password up to 16 characters (upper case/lower
case) and symbols.
• You can reset the password of users with user authority, when you
logged in as administrator.
Command port settings
In the main menu, click [Detailed set up] and [Command port
setting].
Command port : Specify a port number to be used for command
control.
Switch the language of the WEB control window.
To access this page from other pages, click [English] [日本語] at the main menu.
Switching Languages