Filter
Top Products
47
You can make detailed wired LAN settings.
Select [WIRED LAN] at the network menu and click the [ENTER] button.
DHCP
※
:
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS
※
],
[SUBNETMASK
※
] and [DEFAULT GATEWAY
※
].
※ “Glossary” (See page 64)
Wired LAN settings
The following wired LAN settings are set before the projector leaves the factory.
DHCP : OFF
IP ADDRESS : 192.168.10.100
SUBNETMASK : 255.255.255.0
DEFAULT GATEWAY : 192.168.10.1
Default wired LAN settings
A wired LAN and wireless LAN cannot be used in the same segment.
Network/Security setting of the projector (cont.)
WIRED DETAILED SETUP
OK CANCEL
RETURN
SELECT
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
192.168. 10.100
OFF
192.168. 10. 1
255.255.255. 0