Panasonic PTF300NTU Projector User Manual


 
Settings
POSITION menu
ENGLISH - 36
You can switch the aspect ratio manually when needed.
Press I H to cycle through the options.
J Aspect ratio options
Q AUTO
Signals which contains an identifying aspect signal
will be detected and automatically project the
image in proper ratio. (NTSC and 525i (480i)
signals only)
Q 4:3
When a 4:3 or 5:4 signal is detected, the image will
be projected without any change, and other signals
will be adjusted to 4:3 with preserving original ratio.
Q 16:9
When a16:9 is input, the image will be projected
without any change, and other signals will be
adjusted to 16:9 without preserving original ratio.
Q S4:3
The input signal will be sized down 75 % and
projected. When projecting 4:3 signal on to a 16:9
screen, it will be sized down 75 % with preserving
original ratio.
Q THROUGH
The image will be projected without any size
adjustment.
ASPECT
NOTE:
If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Select
an aspect ratio which preserves the intention of the image creator.
The order of ASPECT types is defined not only by the input method but also by the input signals. See “List of compatible
signals” on page 52.
If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place,
such as a restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law.
Selectable aspect ratio options vary according to input signals.