Panasonic PTF300NTU Projector User Manual


 
Settings
PROJECTOR SETUP menu
ENGLISH - 42
When installing the projector, select the projection
method according to the projector position. Press I H
to cycle through the options. See “Projection method” on
page 16.
If you use the projector at high elevation, the HIGH
ALTITUDE MODE setting needs to be ON to set the fan
speed high. Press I H to select the required option.
OFF The fan speed is low.
ON The fan speed is high.
You can switch to the Panasonic past model's control
commands for COMPUTER connection.
You can assign a certain menu function to the
FUNCTION button as shortcut. Press I H to select the
required menu option, and the ENTER button.
J VOLUME
You can adjust the volume of the built-in monaural
speaker and VARIABLE AUDIO OUT terminal.
I Decrease
H Increase
J BALANCE
You can adjust to hear the sound played equally
through both right and left from VARIABLE AUDIO
OUT, or shift the balance so more sound plays
through the left or right side.
I More sound plays through the left
side
H More sound plays through the right
side
J IN STANDBY MODE
You can switch on/off the sound output in standby mode.
OFF No sound in standby mode.
ON Output audio in standby mode.
J AUDIO IN SELECT
You can switch the audio output method for
COMPUTER1 IN, COMPUTER2 IN and DVI-D IN
terminals.
Q DVI
COM.AUDIO IN 2
Output audio that is input to the
COMPUTER AUDIO 2.
AUDIO IN Output audio that is input to the
AUDIO IN.
Q COMPUTER1
COM.AUDIO IN 1
Output audio that is input to the
COMPUTER AUDIO 1.
AUDIO IN Output audio that is input to the
AUDIO IN.
INSTALLATION
FRONT/DESK
Setting on a desk/floor and
projecting from front
FRONT/CEILING
Mounting on the ceiling and
projecting from front
REAR/DESK
Setting on a desk/floor and
projecting from rear
REAR/CEILING
Mounting on the ceiling and
projecting from rear
HIGH ALTITUDE MODE
NOTE:
At 1 400 m (4 593 ft) above sea level, the setting must
be ON.
The loudness of fan noise depends on the HIGH
ALTITUDE MODE setting.
EMULATE
DEFAULT
F100, FW100, F200, F300,
FW300 models
D3500 D3500 models
D4000 D4000 models
D/W5K series
D5500, DW5000, D5600,
DW5100, D5700 models
L730 L520, L720 models
L780 L750, L780 models
L735 L735 models
L785 L785 models
LB/W80 LB75, LB80, LW80 models
FUNCTION BUTTON
Options Functions Refer
DISABLE
Deactivate the FUNCTION
button.
-
ASPECT Display the ASPECT menu. 36
PICTURE MODE
Display the PICTURE MODE
menu.
33
DAYLIGHT VIEW
Display the DAYLIGHT VIEW
menu.
34
CLOSED CAPTION
Press to turn on/off the
CLOSED CAPTION.
38
NOTE:
Without any operation for 5 seconds, the displayed
menu will be disappeared.
AUDIO SETTING