Filter
Top Products
Chapter 4 Settings — Menu navigation
ENGLISH - 45
Note
f Pressing the <RETURN> button or the <MENU> button while the menu screen is displayed returns to the upper hierarchical menu screen.
f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted or
used are shown in gray characters, and they cannot be selected.
f Some items can be adjusted even if signals are not input.
f Individual adjustment screen is cleared automatically if no operation is performed for approximately ve seconds.
f For menu items, refer to “Main menu” (x page 45) and “Sub-menu” (x page 46).
f The cursor color depends on the settings of the [OSD DESIGN] menu (x page 72). The selected item is displayed with the yellow cursor
by default.
f In a portrait setting, the menu is displayed sideways.
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory default settings.
button
1) Press the <DEFAULT> button on the remote control.
0
CONTRAST
ADJUST
Note
f You cannot reset all the settings to the factory default at a time.
f To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute [PROJECTOR SETUP] menu →
[INITIALIZE] (x page 91).
f Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
f The square mark under the bar scale in the individual adjustment screen indicates the factory default setting. The position of the square
mark varies by the selected input signals.
Current adjustment value
Factory default setting
Setting the on-screen display to show/hide
If you press the <MENU> button on the control panel or the remote control for at least three seconds, the on-screen display setup screen is
displayed and the on-screen display can be set to show/hide.
Note
f If the [SECURITY] menu → [TEXT DISPLAY] is [ON], the on-screen setting screen cannot be displayed.
Main menu
The main menu consists of the following 12 items.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
Main menu item Page
[PICTURE] 49
[POSITION] 54
[ADVANCED MENU] 58
[DISPLAY LANGUAGE] 63
[3D SETTINGS] 64
[DISPLAY OPTION] 67
[PROJECTOR SETUP] 76