Filter
Top Products
38
4. Enter the desired date and time by performing either of
the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
5. Repeat Step 3 and 4 to edit Search Editing Area.
6. After editing, press the CAM (SET) button.
The associated record will be displayed on the Record
List.
● Operation (WJ-HD200 Series)
The following is the LCD display and operating procedure
of search playback.
LCD display
Operating procedure
1.
Press the SEARCH/T&D SEARCH button. The time & date
search window will be displayed on the active monitor.
2. Move the cursor to a position to be edited by perform-
ing either of the following.
• Move the 3D joystick controller to the right or left.
• Rotate the shuttle ring clockwise or counterclock-
wise.
3. Enter the desired date and time by performing either of
the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
4. Press the PLAY/PAUSE button or CAM (SET) button.
The specified playback image will be displayed on the
monitor.
Notes:
• To quit search playback, press the MON (ESC) or EXIT
button. Live image will be displayed again on the moni-
tor.
• You will use no function buttons for controlling the
recorder.
• Image to be played back differs depending on
recorders. (Refer to the operating instructions of
recorder.)
■ Time & Date Search Playback
You can search playback images by entering a desired
recording date and time.
Note: To cancel the entry, press the MON (ESC) or EXIT
button. The LCD display will return to the normal status.
1. Press the T & D SEARCH button while holding down the
SHIFT button. The time-and-date entry form will appear
on the LCD.
Note: You can change the display pattern setting. (Refer to
p. 60 Time & Date Search Display Pattern.)
2. Move the cursor to a position to be edited by perform-
ing either of the following.
• Move the 3D joystick controller to the right or left.
• Rotate the shuttle ring clockwise or counterclock-
wise.
3. Enter the desired date and time by by performing either
of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the numeric buttons.
4. Press the PLAY/PAUSE or CAM (SET) button. The
image on the specified date and time will be played
back on the active monitor.
After the image has been played back, the LCD will
return to the default status.
When using WJ-HD500 Series
Group selection is required after Step 3. Perform as follows.
1. Press the PLAY/PAUSE or CAM (SET) button.
"Group Select" menu will appear on the LCD.
Mmm/DD/YYYY HH:MM 12
Mar/16/2004 01:32 PM
Mmm/DD/YYYY HH:MM 12
Mar/17/2004 12:00 AM
Search Mode HD200
03-05-07 20:30:00
TO SEARCH PUSH PLAY KEY
HD500 Index Search
Group Select=All-G
010009
DATE MAY29.00
G2
G1
23:59:59 T/L
22:15:40 M/S ALM-TRM12
O/S ALM-VMD3
T/L
T/L ALM-TRM1
M/S ALM-PC4
T/L EMR
T/L MAN
2343RECORD)(TOTAL
21:00:07
17:33:05
7:23:11
6:59:44
8:55:28
0:01:28
G3
ALL
ALL
G4
ALL
G3
010008
010007
010006
010005
010004
010003
010002
GROUP NO TIME REC-MODE
ALL GROUP
MAY29.00SEARCH: 9:31 G1
SEL:←→ CHG:+– EXE:SET ESC:FSTOP