Filter
Top Products
Daily Care and Maintenance
33
English
2
Dampen the tip of a cotton swab in ethyl alcohol
and gently wipe the printer head.
• Never touch the printer head or the surrounding area
with your hands as this may disable copying.
3
Remove the thermal transfer film with both hands
and carefully wipe any dirt or stains off the platen
roller and pick-up roller.
• For details on removing the thermal transfer film, see
page 16.
• Dampen a soft cloth with neutral kitchen cleaner
diluted in water, wring the cloth thoroughly, and wipe
the entire surface of the rollers while rotating them. If
this does not remove all dirt, wipe with a cloth
dampened with ethyl alcohol.
4
Install the thermal transfer film in its original
position and close the printer door.
• For details on installing the thermal transfer film, see
pages 10, 11.
• Close the printer door firmly until a click is heard.
• If “ ” is displayed on the Multi-Copy/Error Indicator
when the power is turned on, this indicates that the
thermal transfer film has not been installed properly or
that there is slack in the thermal transfer film. Check
the condition of the thermal transfer film and for slack
in the thermal transfer film.
Cotton swab
Printer head
(Gold)
Clean the Printer Head
Note
Pick-up roller
Platen roller
Clean the Platen Roller and the Pick-up Roller
Latches
Note