Filter
Top Products
Troubleshooting
35
English
■ Meanings of error codes
The following table describes the meaning of each of the symbols which may flash in the Multi-Copy/Error
Indicator.
If other indications such as “ ” appear, call your dealer.
Indication Cause Remedy
See
Page
(Error)
Data transfer error Connect the USB cable securely. 22
(Screen)
The screen will not move.
Remove any chart paper attached to
the screen and slowly move the
screen by hand.
–
(door)
The printer door is not closed
securely.
Close the printer door securely. 11
(Jam)
Paper jam
Open the printer door and remove
the jammed paper.
17
(ribbon)
The thermal transfer film is slack, has
run out or is not installed.
Remove the slack from the thermal
transfer film, replace or install the
thermal transfer film.
10
16
(Paper)
Out of paper Load copy paper. 12
(Scanner Failure)
The scanner or screen is in strong
sunlight or strong lighting.
Change the direction of the screen or
block the light.
–