Filter
Top Products
142
To send a Document with Sub-address
Using One-Touch/ABBR. Number Dialing
The operation is the same as for normal dialing
Using Manual Number Dialing
Use to separate the Telephone number and the Sub-address.
(see Note 1) (see Note 2) (see Note 3)
1
Set document(s) face down.
2
Ex:
3
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
1
Set document(s) face down.
2
Enter the telephone number, press then enter
the Sub-address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex: Telephone number = 5551234, Sub-address=2762
Enter as:
3
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
1. separates the Sub-address from the Telephone number and is indicated by an "s" in the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
ENTER STATION(S)
THEN PRESS START 00%
01
<01> (Station name)
5551234s2762
START
* STORE * NO. 001
PAGES=001 01%
FLASH
ENTER STATION(S)
THEN PRESS START 00%
FLASH
5 5 5 1 2 3 4
FLASH
2 7 6 2
TEL. NO.
5551234s2762
❚
START
* STORE * NO. 001
PAGES=001 01%
FLASH
Sub-addressing
Note: