Filter
Top Products
13
123
456
789
0
ABC DEF
JKL MNO
TUV WXY
OPER
GHI
PRS
TONE
TONE
STOP
COPY
START
MEMORY
DIRECTRY
SEARCH
STAMP
VOLUME
+
-
CONTRAST
HALFTONE
RESOLUTION
PAUSE
REDIAL
ABBR
SUB-ADDR
FLASH
FUNCTION
CLEAR
SET
LINE
SELECT
MONITOR
Used to set Normal, Lighter, or Darker.
(See page 41)
Used to start or select the function and
sub-functions.
These functions are explained in detail on
page 10.
Used to search for a station name.
(See page 49 and 54)
Used to enter a pause when recording or
dialing a telephone number, or to redial the
last dialed number. (See page 59)
Used to start Abbreviated Dialing. (See page
48 and 53)
Used to separate the Sub-address from the
telephone number when dialing, or to access
some features of your PBX.
Used to erase the previously entered input.
Used to set operations.
Used to start On-Hook Dialing. (See page 56)
Used to cancel operations. When it is
pressed, the machine will return to standby.
Used to make copies.
(See page 64)
Used to start operations.
Used for Manual Number Dialing,
recording phone numbers, and selecting
functions.
Used to temporarily change the Dialing
Mode to Tone when Pulse mode is set.
Provides OFF, QUALITY or FAST settings for
halftone documents. (See page 42)
Used for the following:
• Adjust the monitor and ringer volume.
(See page 23)
• Move the cursor while entering numbers
and characters.
• Search the station name for Directory
Search Dialing.
• Confirm the entered station for multi-station
communication.
• Select functions.
• Confirm the current communication modes
(e.g. Page number, ID, Dialed Telephone
number, File number) when the unit is ON
LINE.
Used to set Standard, Fine, Super-Fine.
(See page 41)
Used to select either memory or direct
communication.
(See page 44 to 54)
Used to turn the verification stamp ON or
OFF. (See page 42)
Used to select the communication port.
Available for UF-895 only if the Optional G3
Communication Port Kit has been installed.
(See page 173)
Control Panel
1