Filter
Top Products
158
403 No polling capability at the remote side. Ask remote side to set "POLLED=ON". --
404/405 During initial handshake, communication error
occurred.
Reload the document and send again. --
406 Transmission Password does not match.
Receiving Password does not match.
Received from an unauthorized station in Selective
Reception mode.
Check the password or the telephone number
in One-Touch or Abbreviated station.
113
115
116
407 No confirmation from the receiving station for the
previous page sent.
Wait a few minutes and send again. --
408/409 Remote side confirmation of previous page is illegible. Wait a few minutes and send again. --
410 Communication aborted by the transmitting side. Check with the other party. --
411 Polling password does not match. Check the polling password. 68
412 No data from the transmitting side. Check with the other party. --
414 Polling password does not match. Check the polling password. 68
415 Polling transmission error. Check the polling password. 68
416/417
418/419
Received data has too many errors. Check with the other party. --
420/421 Machine goes to receiving mode, but receives no
command from the transmitting side.
1. Remote side misdial.
2. Check with the other party.
--
422/427 Interface is incompatible. Check with the other party. --
430/434 Communication error occurred while receiving. Check with the other party. --
436/490 Received data has too many errors. Check with the other party. --
456
• Unit received a confidential document or was
requested to be polled of a confidential
document under any of following conditions.
1) Not enough space in memory to receive the
confidential document.
2) Confidential Mailbox is full.
3) While printing received document.
• Unit was requested to relay a document.
1. Print a File List and check the contents.
2. Wait until unit finishes printing.
77
492/493
494
Communication error occurred while receiving. Check with the other party. --
495 Telephone line disconnected. Check with the other party. --
501/502 Communication error occurred using the internal V.34
Modem.
Check with the other party. --
Info.
Code
Meaning Action Page
Troubleshooting