Filter
Top Products
108
■ WJ-FS616 Video Multiplexer Control
● Connection
(1) Connect MULTISCREEN OUT on the rear of the WJ-FS616 to VIDEO IN 1 on the rear of the WJ-NT204.
(2) Connect the RS-485 ports of both units with a RS-485 cable.
Note: Set DIP switch #3 on the rear of WJ-NT204 to ON.
● Setup
(1) On the ADMINISTRATOR SETUP PAGE, click the [SERIAL PORT] button to open the SERIAL PORT SETUP window. For
TYPE, select WJ-FS616. Set the same communication parameters as for the WJ-FS616.
(2) On the ADMINISTRATOR SETUP PAGE, click the [MODE SETUP] button to open the MODE SETUP window.
Make the CONTROL SETUP as follows.
CAMERA CONTROL: OTHERS
AUX SYSTEM: WJ-FS616
● Control Operation
On the Location bar, type http://192.168.0.10 to open the WJ-FS616 OPERATION VIEW window.
q
e
w
!5
q CAMERA SELECT
To select a camera (camera 1 to 16) connected to the
WJ-FS616 Video Multiplexer. The image of the selected
camera is displayed in spot mode.
w PRESET SELECT
To move the combination camera (option) connected to
the WJ-FS616 to any of 8 preset positions.
e WJ-FS616 CONTROL PANEL
Opens the WJ-FS616 control panel on the bottom cen-
ter of the window.
Scroll down the left window panel to display the follow-
ing buttons 4-6.
r WJ-HD100 CONTROL PANEL
Opens the WJ-HD100 control panel on the bottom cen-
ter of the window.
r
!1
i
!2
o0
u
!3
!0
!4
!7
!8
t
y