Filter
Top Products
Configuration Options
C-21
3166-A2-GB20-10
November 1998
Table C-6. General Management Configuration Options (3 of 4)
Access 1: Read
Next Read R/W Prev
Access 1. Specifies the type of access allowed for Community Name 1. This is the type
of access allowed for external SNMP managers accessing objects in the MIB using
Community Name 1.
Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for
this device when community name 1 is used. This includes all objects specified as
either read-only or read/write in the MIB RFCs.
R/W – Allows read and write access (SNMP Get and Set) to the objects in the MIB for
this device when community name 1 is used. Write access is allowed for all objects
specified as read/write in the MIB RFCs. Read access is allowed for all objects
specified as either read-only or read/write.
CommunityName2:
Next Edit Clear Prev
Community Name 2. Specifies the second of two community names that are allowed to
access this unit’s Management Information Base (MIB). External SNMP managers must
supply this name to access an object in the MIB.
Edit – Allows you to edit or display the second community name.
Clear – Allows you to clear the second community name.
Access 2: Read
Next Read R/W Prev
Access 2. Specifies the type of access allowed for Community Name 2. This is the type
of access allowed for external SNMP managers accessing objects in the MIB using
Community Name 2.
Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for
this device when community name 2 is used. This includes all objects specified as
either read-only or read/write in the MIB RFCs.
R/W – Allows read and write access (SNMP Get and Set) to the objects in the MIB for
this device when community name 2 is used. Write access is allowed for all objects
specified as read/write in the MIB RFCs. Read access is allowed for all objects
specified as either read-only or read/write.
Com IP Adr:
Next Edit Clear Prev
Com Port IP Address. Specifies the IP address for the communication port if the Com
Use configuration option is set to Mgmt.
Edit – Allows you to edit or display the IP address for the communication port.
Clear – Allows you to clear the IP address for the communication port. The IP address
is set to 000.000.000.000.
NOTE: This configuration option is not available if the communication port is
disabled.