Filter
Top Products
Index
IN-5
3166-A2-GB20-10 November 1998
Shared Diagnostic Control Panel (SDCP),
acquiring/releasing the user interface, 3-38
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-19, 3-26
option table, C-19
connection examples, F-1– F-6
database, 1-2
IP addressing, F-1– F-6
manager, 1-2
MIBs
functional description, E-1
list of objects, E-1
procedure for configuring access, 3-24
objects, 1-2
principles of operation, 1-2
SNMP Down message, 4-4, 4-15
traps
functional description, 1-2, 4-12
procedure for configuring, 3-26
SNMP Management
enabling and disabling, C-19
Number of Security Managers, C-19
Number of Trap Managers, C-23
System Contact, C-20
System Location, C-20
System Name, C-20
SNMP Traps, 4-12
Alarm and Trap Dial Out, C-17
enabling and disabling, C-16, C-23, C-24
enterprise-specific, 4-13
Number of Trap Managers, C-23
Trap Disconnect, C-16
Trap Manager Destination, C-23
Trap Manager IP Address, C-23
Stat (Status) branch, examples of use, 3-7, 3-10, 4-1,
4-3, 4-5, 4-32
STest (Self-Test Health) branch, example of use, 4-1
StEvnt (Status Event) report, 4-9
straps, C-1
subnet, 3-19, C-22, F-2
synchronous data port, RS–232–like–MIB, E-1
System Contact, C-20
System Location, C-20
System Name, C-20
T
Telnet session
Disconnect Time, C-15
enabling and disabling, C-14
Inactivity Timeout, C-14
Password Mode, C-14
Test branch, example of use, 4-15
test commands, 4-15
front panel LED indications, 3-4
lamp test, 4-30
local loopback, 4-19
abort, 4-25
data channel loopback (DCLB), 4-23
data terminal loopback (DTLB), 4-24
line loopback (LLB), 4-20
payload loopback (PLB), 4-21
repeater loopback (RLB), 4-22
remote loopback, 4-16
test messages, 4-32
test patterns, 4-26
Test Duration, C-10
Test in progress, Device Health and Status message,
4-4
test jacks
functional description, 4-15
physical description, 3-3
Test Timeout, C-9
timing, 3-34
traps, SNMP.
See
SNMP traps
troubleshooting
device health, 4-3
diagnostic table, 4-14
performance, 4-5
power-up self-test, 4-1
TStat (Test Status) branch, example of use, 4-32
Tx Clock, C-4
U
UAS (Unavailable Seconds) report, 4-7
User Configuration branch
example of use, 3-16– 3-40
option table, C-10
user interface, acquiring/releasing, 3-38