Filter
Top Products
Index
IN-3
3166-A2-GB20-10 November 1998
G
Gen (General) Configuration branch
example of use, 3-34
option table, C-9
I
ID (Identity) branch, example of use, 3-7
indicators, 3-4
Invert Data, C-4
Invert Tx Clock, C-4
IP (Internet Protocol) addressing
configuration option, C-21
example of use, F-1– F-6
procedure for configuring, 3-21, 3-28
K
keypad, operation, 3-2
L
lamp test, 4-30
LAN Adapter, F-1
LED Status branch, example of use, 3-10
LEDs, front panel
functional description, 3-4
lamp test, 4-30
Line Build Out, C-7
line loopback (LLB), 4-20
link layer protocol, 3-19, 3-23
link trap, 4-12
Link Trap Interfaces, C-24
Link Trap Type, C-24
LOF (Loss Of Frame) condition, front panel LED
indication, 3-5
LOFC (Loss Of Frame Count) report, 4-8
loopback
front panel LED indication, 3-4
local, 4-19
abort, 4-25
data channel loopback (DCLB), 4-23
data terminal loopback (DTLB), 4-24
line loopback (LLB), 4-20
payload loopback (PLB), 4-21
repeater loopback (RLB), 4-22
remote, 4-16
LOS (Loss Of Signal) condition
ASCII terminal/printer message, 4-11
Device Health and Status message, 4-4
front panel LED indication, 3-5
Performance Report message, 4-9
Self-Test Health message, 4-2
troubleshooting, 4-14
Lpbk (Local Loopback) branch, example of use, 4-19
M
maintenance
device health and status, 4-3
performance reporting, 4-5
power-up self-test, 4-1
manager, SNMP, 1-2
Master Clk fail, Device Health and Status message,
4-4
master clock
functional description, 3-34
procedure for configuring, 3-34
messages
alarm
Performance Report, 4-7
Self-Test Health, 4-2
troubleshooting, 4-14
with ASCII terminal/printer, 1-2– 1-4, 4-11
status
Performance Report, 4-7
Self-Test Health, 4-2
Test Status, 4-32
Mgmt Link, configuration option, C-6
MIBs, SNMP, E-1
N
Near–End Performance Statistics, C-5
NET (Network) Configuration branch
example of use, 3-13
option table, C-7
Net DCLB, C-2
Network Circuit Identifier, C-9
Network Initiated Line Loopback, configuration option,
C-8
Network Initiated Payload Loopback, configuration
option, C-8