Filter
Top Products
v
8000-A2-GB26-10
January 1999
About This Guide
Document Purpose and Intended Audience
This guide describes how to configure and operate the software component of
the Hotwire Digital Subscriber Line Access Multiplexer (DSLAM) system. It is
intended for administrators and operators who maintain the networks that support
Hotwire operation.
A basic understanding of internetworking protocols and their features is assumed.
Specifically, you should have familiarity with Simple Network Management
Protocol (SNMP), Network Management Systems (NMSs), and the following
internetworking concepts:
H TCP/IP applications
H IP and subnet addressing
H IP forwarding (also referred to as IP routing)
H Bridging
It is also assumed that you have already installed either the Hotwire 8600, 8800,
or 8810 DSLAM. If you have not done so already, refer to the appropriate Hotwire
DSLAM Installation Guide for installation instructions.
NOTE:
It is highly recommended that you read the
Hotwire DSLAM for 8310 MVL
and 8510 RADSL Cards Network Configuration Guide
before you begin to
use this guide and the Hotwire software. The
Hotwire DSLAM 8310 MVL and
8510 RADSL Cards Network Configuration Guide
provides introductory
information about the Hotwire DSLAM network models and theories.