Filter
Top Products
A-1
8000-A2-GB26-10
January 1999
Download Code
A
The Download Code menu option on the Hotwire DSLAM gives you the ability to
upgrade your software with a new version of code and then apply this code to
your system.
New firmware releases are typically applied to the MCC card, DSL cards, and/or
endpoints in your system.
When a software upgrade affects both the MCC and the DSL cards, you must
download and apply a new version of code into each of the DSL cards before
you download and apply a new version of code into the MCC.
When you are downloading code to an endpoint, configure your TFTP server with
the following timeout values:
H Retransmission timeout – Value not less than 10 seconds.
H Total transmission – Value not less than three times the retransmission
timeout.
You can also use the above values for a standard TFTP transfer.