Filter
Top Products
Monitoring the Hotwire DSLAM
5-19
8000-A2-GB26-10
January 1999
Table 5-5. Bridge Options (2 of 3)
MAC Table B-E-B
Displays the MAC table.
Bridge – lb0 – Name of the Logical Bridge (Equivalent to e1a Ethernet).
Entry # – Enter the MAC table entry number you wish to view.
Entries – Number of entries in the MAC table.
Bridge Timer – Timer that is used to show dynamic MAC addresses.
# – Entry number.
MAC Address – MAC address in
xx.xx.xx.xx.xx.xx
format.
VNID ID – VNID ID associated with the MAC address.
Age (Secs) – Age in seconds since the address was last used.
Intf – Interface behind which the network element associated with the MAC address lies.
Flags – Dynamic = MAC addresses that are determined via DHCP. Perm (DHCP) =
MAC addresses are determined by the lease time. Entries in the MAC table will be
removed when the lease time expires.
Client B-E-C
Displays information on specific clients or allowable subnets.
DSL Port # – Enter the DSL port number 1–4 (Default = 1).
Item to Display – Entry number.
Total – Total number of users.
Item – Enter the input number of the client (Default = 0).
IP Address – Client IP address in
nnn.nnn.nnn.nnn
format (Default = 0).
Subnet Mask or Lease Expiration – Variable based on Static or Dynamic entry. For
static entries, Subnet Mask is used with IP address to specify a range of allowable static
host IP entries to the Client table. For dynamic entries, Lease Expiration is the date and
time when the client’s DHCP lease expires.
NHR – IP address of the default next hop router in
nnn.nnn.nnn.nnn
format.
VNID – VNID between 2–4094 (Default = none).
Type – S = Static or D = Dynamic.
Port Specific Parameters – Enabled/Disabled. Shows active VNID information.
NOTE: In order to display the following information, VNID has to be activated on
the Port screen in the Configuration Bridge screen menu (A-E-C). Refer to
Table 4-4, Bridge Options
,
in Chapter 4,
8310 MVL and 8510 RADSL Card
Configuration.
DNHR: – Default next hop router name.
IP Scoping: – Enabled/Disabled.
Mux Mode: – Enabled/Disabled.
IP Filtering: – Enabled/Disabled. IP source filtering.