Filter
Top Products
HotWire Menus and Screens
2-12
8000-A2-GB20-20
November 1997
The following figure illustrates the complete Monitoring menu hierarchy from the
HotWire – DSL menu.
(A) Card/CPE Status
A. Card Info
B. Login History
C. Syslog
(B) Physical Layer
A. Active List
B. Ether Statistics
C. HDLC Bus Stats
D. DSL Link Perf
E. DSL Perf Stats
F. DSL Error Stats
G. DSL Xmit Stats
(C) Interfaces
A. Active List
B. Status
(D) Network Protocol
A. Socket Statistics
B. UDP Statistics
C. TCP Statistics
D. IP Statistics
E. ICMP Statistics
F. SNMP Statistics
G. HDLC Statistics
H. PPP Stats*
(E) IP Router
A. Routing Table
B. ARP Table
C. Filter Table
(H) PPP Stats
A. General
B. LCP Stats
C. IPCP Stats
97-15565-01
Monitoring
A.Card Status
B.Physical Layer
C.Interfaces
D.Network Protocol
E.IP Router
F. RTU Information
*Not on Model 8540
(F) RTU config
A. RTU Information
Logging in to the System (After the System Has Been
Configured)
NOTE:
When you power on the system for the first time, the system displays the
Who Am I screen. This screen can be accessed only from the local console.
For information about this screen, see
Accessing the System for the First
Time
in Chapter 3.
This section describes how to log in to the HotWire DSLAM system after the
system has been configured for the first time.