Filter
Top Products
vii
8000-A2-GB20-20
November 1997
About This Guide
Document Purpose and Intended Audience
This guide describes how to configure and operate the software component of
the HotWire Digital Subscriber Line Access Multiplexer (DSLAM) system. It is
intended for administrators and operators who maintain the networks that support
HotWire operation.
A basic understanding of internetworking protocols and their features is assumed.
Specifically, you should have familiarity with Simple Network Management
Protocol (SNMP), Network Management Systems (NMSs), and the following
internetworking concepts:
H TCP/IP applications
H IP and subnet addressing
H IP routing (also referred to as IP forwarding)
It is also assumed that you have already installed either the HotWire 8600 or
8800 DSLAM. If you have not done so already, refer to the appropriate HotWire
DSLAM Installation Guide for installation instructions.
NOTE:
It is highly recommended that you read the
HotWire DSLAM for 8540 and
8546 DSL Cards Network Configuration Guide.
before you begin to use this
guide and the HotWire software. The
HotWire DSLAM for 8540 and 8546
DSL Cards Network Configuration Guide
provides introductory information
about the HotWire DSLAM network model and theories.