Filter
Top Products
Configuring the HotWire DSLAM
4-9
8000-A2-GB20-20
November 1997
Creating SNMP Community Strings and Authentication Failure Trap
Use this procedure to configure SNMP community strings and enable the
Authentication Failure trap mechanism. For additional security, ensure that
source validation is enabled. (See Appendix C,
Checklist for Setting Up SNMP
Features.
)
" Procedure
To create SNMP community strings and authentication failure trap:
1. Select
Configuration
→
SNMP
→
Communities/Traps
(A-F-D)
.
2. Enter values for the following fields and press Return after each entry:
Field
Description Input
Authentication Failure Trap Determines whether to
send a trap when a
SNMP request
community string does
not match or when the
password for a telnet
session is incorrect.
Enable/Disable
Community Name SNMP community
string name.
Up to four unique
community names per
screen
Access Permission that is
granted for each
community.
RO = Read Only
RW = Read/Write
NA = No Access
IP address and port NMS system host IP
address
nnn.nnn.nnn.nnn
format
Input Number Number of port. Default = 162
3. Confirm the save and press Ctrl-z to return to the
Configuration
→
SNMP
menu.