Filter
Top Products
Initial Setup Instructions
3-3
8000-A2-GB20-20
November 1997
3. Do one of the following at the (nnn.nnn.nnn.nnn): prompt:
— To accept the subnet mask, press Return.
— To enter a different subnet mask, enter a new subnet mask and press
Return.
The system highlights the OK to restart?: prompt.
4. Type y at the yes/no: prompt to restart the card or n to decline the restart.
If you type y, the card restarts. The system displays the HotWire Chassis
Main Menu.
NOTE:
At this point, the MCC card can accept a Telnet session to be used for
remote configuration.
Additional Setup Instructions
This section describes additional setup instructions you should perform. On the
Chassis Information screen, you can enter pertinent chassis information, such as
the chassis name, name of person responsible for the system, and physical
location of the chassis.