Filter
Top Products
7
3.
Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable
into the jack labeled ETHERNET.
— Use a straight-through cable to connect the other end of the cable to an
Ethernet hub. Do not connect to the hub’s optional Uplink connection with a
straight-through cable; the Uplink connection requires an Ethernet crossover
cable.
– or –
— Use an Ethernet crossover cable to connect to a PC with an Ethernet Network
Interface Card (NIC) installed or a hub’s Uplink connection.
00-16879
ETHERNET
COM
POW
ER
NET
Ethernet
Straight-Through
Cable
ETHERNET
DSL 9783 Router
Hub