Filter
Top Products
8
4.
Use a VT100-compatible asynchronous terminal or PC to set up management
access to the unit. Insert the DB25 end of the EIA-232 cable into the router’s COM
port. Tighten the screws on each side of the connector. Insert the other end into the
terminal or PC.
The terminal or PC’s configuration must be compatible with the router’s. Refer to the
procedure on page 13 of
Configuration Setup
. If connecting an external modem to
the COM port, refer to
Connecting an External Modem
on page 23.
COM
Port
00-16876
ETHERNET
COM
POW
ER
NET
VT100
Terminal
DSL 9783 Router