Filter
Top Products
36
Status. Blinks yellow from one to eleven times to indicate system status.
Each pulse pattern is separated by a 2 second “off” period. Greater
pulse patterns have higher priority (buffer saturation has greater priority
than an empty MAC table). Valid system statuses are:
• 1 pulse = system status ok
• 2 pulses = No MAC entries in the MAC address table
• 3 pulses = Clear to send (CTS) or Carrier Detect (DCD) from base unit
are not asserted
• 4 pulses = IMRC2/IA buffer is saturated
• 5 pulses = WAN receive frame(s) too large
• 6 pulses = WAN receive frame(s) not Octet aligned
• 7 pulses = WAN receive frame(s) aborted
• 8 pulses = Detected WAN receive frame(s) with bad CRC
• 9 pulses = Detected LAN receive frame(s) too large
• 10 pulses = Detected LAN receive frame(s) not Octet aligned
• 11 pulses = Detected LAN receive frame(s) with bad CRC
After a status code is displayed eight times and the associated condition
is removed, the status code will no longer appear.
Link. Glows green to indicate good link integrity on the 10Base-T
twisted pair line.