Filter
Top Products
SNMP 36
Model 3231 User Manual 4 • Web Interface Configuration
SNMP
You can use the Web GUI to configure SNMP. (See “Connecting to the Web GUI” on page 26).
Note
It is NOT reccommended that you configure basic options through the Web
GUI. Use the LCD panel menu to configure basic options such as
G.SHDSL, and use the Web GUI for advanced configuration only, such as
SNMP.
This section describes how to configure the SNMP server so that an agent can monitor the unit via SNMP. To
get to the SNMP configuration page in the Web GUI, click on System Configuration > SNMP Daemon on
the left navigation menu.
Figure 12. SNMP Settings in the Web GUI
From this page, you can configure the following options:
• Static Variables: Set the system MIB variables.
• Community Table: Add/delete communities that have access to this unit. The password is the community
string. If the management IP is 0.0.0.0, all requests from that community will be accepted regardless of the
originating IP address.
• Trap Table: Add/delete trap daemons. The IP address is the address of the PC running a trap daemon. The
unit will send SNMPv1 traps on DSL and Ethernet link up and down events.
• Save SNMP Configuration: Save SNMP configuration. For SNMP configuration to persist across reboots,
click the Save button on this page, and then, save the system configuration. Both must be done in that
order.