A • Specifications Model 3201 G.SHDSL Integrated Access Device User Guide
116 Management
• Enhanced ILMI 4.0 for auto-configuration of ATM PVCs.
• FRF.12 Frame Relay Fragmentation support, LMI For Frame Relay PVC Link Management, FRF.5 Frame
Relay to ATM Network internetworking, and FRF.8 Frame Relay to ATM Service Internetworking.
Management
• User selectable ATM, PPP, or Frame Relay WAN datalink connection.
• Web-Based configuration via embedded web server
• CLI menu for configuration, management, and diagnostics.
• Local/Remote CLI (VT-100 or Telnet).
• SNMPv1 (RFC 1157) MIB II (RFC 1213)
• Quick Start Setup runs through common options to simplify circuit turn-up.
• Logging via SYSLOG, and VT-100 console. Console port set at 9600 bps 8/N/1 settings no flow control.
• EOC access for End-To-End management, configuration, and control.
Security
• Packet filtering firewall for controlled access to and from LAN/WAN. Support for 255 rules in 32 filter sets.
16 individual connection profiles.
• DoS Detection/protection. Intrusion detection, Logging of session, blocking and intrusion events and Real-
Time alerts. Logging or SMTP on event.
• Password protected system management with a username/password for console and virtual terminal. Sepa-
rate user selectable passwords for SNMP RO/RW strings.
• Access list determining up to 5 hosts/networks which are allowed to access management system SNMP/
HTTP/TELNET.
• Logging or SMTP on events: POST, POST errors, line/DSL, PPP/DHCP, IP.
Compliance Standard Requirements
• FCC part 15 Class A (US EMC)
• CE per RTTE 99/5/EC (EMC & LVD)
• FCC Part 68 ( – US Permission to connect)
• IC-CS03 (Canadian Permission to connect)
• Safety – EN60950
Australia Specific
• TS016 (E1 Telecom)
• AZ/NZS 3260 Safety)
• AZ/NZS 35-48 EMC