Filter
Top Products
Creating a DSL Link 97
Model 3201 G.SHDSL Integrated Access Device User Guide 7 • NAT (Network Address Translation)
• DSL data rates should be the same for Remote and Central units
Central Side Configuration
From the WWW interface, do the following:
1. Click on
GSHDSL.
2. Click on Configuration.
3. Change the intended DSL Data Rate to the maximum rate desired.
4. Change Terminal Type to Central.
5. Scroll to the bottom of the page and click on Configure.
6. Click on (GSHDSL) Action.
7. Set to start and click on Action.
8. Save the configuration.
Remote Side Configuration
From the WWW interface, do the following:
1. Click on
GSHDSL.
2. Click on Configuration.
3. Change the intended DSL Data Rate to the maximum rate desired.
4. Scroll to the bottom of the page and click on Configure.
5. Save the configuration.
Confirm that the DSL link is working properly by verifying that the DSL WAN LED is lit.